The Speedfit Stopend can easily be connected or disconnected making it ideal for pressure testing the system or for unfinished projects where you wuld like to resart the project another day.

15mm

22mm

£

£

The speedfit straight connector can be used with cold and hot water plumbing and can also be used with central heating systems to provide a straight connection

15mm

22mm

£

£

The speedfit reducing coupler is used when a reduction or increase in pipe size is needed.

15mm - 10mm

22mm - 15mm

£

£

The speedfit Slip Tee Connector provides a simple way to break into an exising pipe run.

15mm

22mm

£

£

The speedfit connector can be used for hot and cold water plumbing only to a maximum of 65 degrees. This product cannot be used wih central heating systems.

15mm

£

Provides a simple way of repair on a rigid pipe run.

Remove a damaged section of pipe and replace with a repair kit

15mm

22mm

£

£

Used to connect PE Pipe to copper or Speedfit Plumbing Pipe. Must not be buried directly into ground, soil, concrete or other substrates. Cold water only

20mm - 15mm

25mm - 15mm

25mm - 22mm

£

£

£

Suitable for central heating systems

Manufactured in DZR Brass

15mm - 1/2"

22mm - 3/4"

£

£

The Speedfit reducing Tee can be used to join 15mm and 22mm pipes in various ways.

Sizes are listed in the following Order

15 x 15 x 22

22 x 15 x 15

22 x 15 x 22

22 x 22 x 15

£

£

£

£

The Speedfit equal tees are ideal for creating a juntion in your Speed fit plmbing run. Can also be used for central heating systems

15mm

22mm

£

£

The Speedfit equal elbows can be used with central heating systems

15mm

22mm

£

£

Suitable for central heating systems

Manufactured in DZR Brass.

15 x 1/2"

22 x 3/4"

£

£